CRTU-12 Low Voltage Intelligent Power Distribution Monitoring Device

CRTU-12 Low-Voltage Intelligent Power Distribution Monitoring Device

Product Introduction:

The CRTU-12 Low-Voltage Intelligent Power Distribution Monitoring Device is installed on 0.4KV low-voltage capacitor cabinets, primarily used for reactive power compensation, measuring various electrical parameters of the busbar. It features functions such as overvoltage, undervoltage, undercurrent, overtemperature, and voltage/current harmonic protection. When grid parameters exceed the set limits, the controller quickly disconnects the connected capacitors and locks the output to ensure safe operation and extend the capacitor's service life.

Product Models:

CRTU-6 Low-Voltage Intelligent Power Distribution Monitoring Device

CRTU-12 Low-Voltage Intelligent Power Distribution Monitoring Device

Product Inquiry:

For more product information and solution pricing, please call.

Contact: Manager Wu

Phone: 13891834587 (also WeChat)

QQ: 704151787

Email: 704151787@qq.com

Product Features:

The CRTU-12 supports three-phase current measurement, three-phase voltage measurement, three-phase active power measurement, three-phase reactive power measurement, three-phase apparent power measurement, three-phase power factor measurement, frequency measurement, harmonic measurement, and more. It also includes twelve relay outputs and twelve digital input detection functions, with MODBUS (RS485) communication. It uses both power factor and reactive power as control parameters to manage capacitor bank switching.

Technical Parameters:

Applicable Object: Suitable for 0.4KV voltage distribution cabinet capacitor cabinets to achieve reactive power compensation.

Voltage: Three-phase voltages UA, UB, UC (V) (three-phase four-wire connection)

Current: Three-phase currents IA, IB, IC (A)

Active Power: Total, PA, PB, PC (W)

Reactive Power: Total Q, QA, QB, QC (VAR)

Apparent Power: Total, SA, SB, SC (VA)

Power Factor: Pf, PfA, PfB, PfC

Required Reactive Power: The reactive power needed to reach the target power, including three-phase and total required reactive power.

Temperature Measurement: Ambient temperature, busbar temperature

Communication: 1 RS-485 port, Modbus RTU communication protocol

Control Output: Twelve relay outputs

Remote Signal Measurement: Twelve contact opening/closing position switches

Product Application:

Widely used in automated power monitoring systems, it can fully monitor the operational status of power systems and provide reliable and effective energy consumption monitoring data for power system upgrades.